Asaithambi, PerumalPerumalAsaithambiEzzat, Abdelrahman O.Abdelrahman O.EzzatBidira, FiromsaFiromsaBidiraBusier Yesuf, MamuyeMamuyeBusier YesufAbd-Elkader, Omar HamedOmar HamedAbd-ElkaderArun, ThirumuruganThirumuruganArunHariharan, N. M.N. M.HariharanAl-Lohedan, Hamad AbdullahHamad AbdullahAl-LohedanKadier, AbudukeremuAbudukeremuKadier2025-10-102025-10-10202521911363https://hdl.handle.net/20.500.12740/23359In recent years, there has been a rise in the use of electrochemical and advanced oxidation methods to treat the industrial wastewater. The efficiency of several approaches for treating industrial wastewater, including hydrogen peroxide (H<inf>2</inf>O<inf>2</inf>), electro–Fenton (EF) and pulsed–electro–Fenton (PEF) processes were all investigated. In evaluation to the H<inf>2</inf>O<inf>2</inf>, EF, and PEF technologies, the results showed that the PEF process produced 100 % total color and 98 % chemcial oxygen demand (COD) removal efficiency with a low consumption of power of 3.4 kWhrm−3. The experimental parameters comprised the following: COD – 2500 mg L−1, pH – 3, H<inf>2</inf>O<inf>2</inf> – 300 mg L−1, distance between electrode – 0.75 cm, current – 0.40 A, cycle of pulse duty – 0.75, combination of electrode – Fe/Fe, stirring speed – 500 rpm and treatment duration (TD) – 125 min. It was demonstrated that increasing the TD, current, and H<inf>2</inf>O<inf>2</inf> while lowering the COD content improved the COD elimination efficiency while employing a iron (Fe/Fe) electrode combination with wastewater pH of 3. The efficiency of the EF process has been reduced in comparison to the PEF process because of the development of an impermeable oxide layer on the cathode and the oxidation–induced corrosion on the anode. Consequently, experimental results have indicated that the PEF could be a more promising technology than the EF method for eliminating pollutants from wastewater with reduced power consumption and process efficiency. © 2025 Elsevier B.V., All rights reserved.openAccessCONSUMPTION OF POWERELECTRO–FENTONELIMINATION OF POLLUTANTH2O2PULSEDWASTEWATERFERROUS GLUCONATEHYDROGEN PEROXIDEIRONANODESCATHODESCOLOR REMOVAL (WATER TREATMENT)ELECTROCHEMICAL OXIDATIONIRON REMOVAL (WATER TREATMENT)POLLUTION INDUCED CORROSIONPULSED POWER TECHNOLOGY'CURRENTELECTRO-FENTONELECTRO-FENTON PROCESSH 2O 2INDUSTRIAL WASTEWATERSPOWERTREATMENT DURATIONWASTEWATER TREATMENTANODE ELECTRODEARTICLECATHODE ELECTRODECOLORCONTROLLED STUDYCORROSIONELECTRODEOXIDATIONOXYGEN CONSUMPTIONPHPHARMACEUTICSPOLLUTANTVELOCITYArtículo https://doi.org/10.1002/open.202400505