Hybrid Industrial Wastewater Treatment Using a Sono-Alternating Current-Electrocoagulation Technique with Power Usage Estimation
Date Issued
2024
Author(s)
Asaithambi
P Desta
WM Hussen
M Govindarajan
R Asmelash
Z Yesuf
MB Periyasamy
S Thirumurugan
A Sakthivel
P Beyene
D
DOI
10.1002/celc.202400039
Abstract
Distillery industrial wastewater (DIW) was tested for color and COD removal percentages using an electrochemical and advanced oxidation processes (AOPs). Specifically, the study compared direct/alternating-current-electrocoagulation (DC-EC/AC-EC), sono (US), and direct/alternating current-electrocoagulation coupled with sono (US) (DC-EC/US and AC-EC/US) processes. Also evaluated were the effects of these procedures on the power needed to treat DIW. Experimental results showed that compared to single processes such as DC-EC, AC-EC, US, hybrid DC-EC/US, and the hybrid AC-EC/US process achieved a total color elimination efficiency of 100 % and a COD elimination efficiency of 100 % while using a lower power consumption of 4.76 kWhrm-3. The effects of important operational factors such treatment duration, cycle of pulse duty, sonication power, current density, chemical oxygen demand, electrode spacing, electrode pairing, pH, concentration of electrolyte on the % removal of COD and power usage of DIW were investigated using hybrid AC-EC/US process. When using a Fe/Fe electrode combination, the effectiveness of COD removal was shown to be enhanced by increasing the treatment duration, current, US power, and decreasing the COD concentration, electrode spacing. The study also provided the results of an investigation into the synergistic index between AC-EC and US process and operational cost. Based on its ability to efficiently and effectively remove contaminants from wastewater and industrial effluent, the AC-EC/US approach stands out among the other methods. Sono-alternating current-electrocoagulation: Electrochemical assisted oxidation procedure removed color, COD, and calculated power utilization. With less energy than other process, hybrid AC-EC/US eliminated entire color and COD. Hybrid AC-EC/US approach was used to investigate significant operating parameters. Synergistic index and operating cost of the US and AC-EC processes were investigated. image C1 [Asaithambi, Perumal; Desta, Wendesen Mekonin; Hussen, Mohammed; Asmelash, Zerihun; Yesuf, Mamuye Busier; Beyene, Dejene] Jimma Univ, Jimma Inst Technol, Fac Civil & Environm Engn, POB-378, Jimma, Ethiopia. [Govindarajan, Rajendran] Hindustan Inst Technol & Sci, Dept Biotechnol, Chennai 603103, Tamilnadu, India. [Periyasamy, Selvakumar] Adama Sci & Technol Univ, Sch Mech Chem & Mat Engn, Dept Chem Engn, Adama 1888, Ethiopia. [Thirumurugan, Arun] Univ Atacama, Sede Vallenar, Costanera 105, Vallenar 1612178, Chile. [Sakthivel, P.] Karpagam Acad Higher Educ, Ctr Mat Sci, Fac Engn, Dept Sci & Humanities, Coimbatore 641021, Tamil Nadu, India. C3 Jimma University; Hindustan Institute of Technology & Science; Adama Science & Technology University; Universidad de Atacama; Karpagam Academy of Higher Education (KAHE)
File(s)![Thumbnail Image]()
Loading...
Name
Hybrid Industrial Wastewater Treatment Using a SonoAlternating.pdf
Size
6.23 MB
Format
Adobe PDF
Checksum
(MD5):f7933a40bdc4ef8ef8da93b553d092bc


